TEJA FLUXES FOR ALUMINIUM ALLOYS

PRODUCT   : TEJA COVER FLUX T-808 (Furnace Cleaning Fluxes)
COLOUR   : White
APPLICATION RATE  : Depends upon the size & scale build up in the Furnace Walls.
DROSS TYPE  : Not Applicable
MELTING UNIT  : Rotary, Crucible & Electric Furnace.
ALLOY TYPE  : To be used on any Alloy Melting Furnace, Crucible etc.
REMARKS   : Used to remove Oxide build-up on furnace Walls.
PRODUCT FUNCTION  :
Softens Oxide build-up on furnace walls by means of chemical reaction and exothermicity.
METHOD OF USAGE  :
Sprinkle immediately over the Furnace Walls after discharge of the Molten Metal by continuously applying heat and it will soften the hard Oxide build-up on furnace walls by means of exothermic chemical reaction.Sprinkle the Flux till the complete removal of Oxide build-up over the walls of the container. At the time of softening, remove the scale by using suitable device.
ADVANTAGES  : Furnace Cleaning Flux retains the melting capacity and efficiency of the furnace by improving the life of the refractory lining while saving the fuel.
PACKING  : Strong Polythene lined 25kgs HDPE Bags
STORAGE  : Always keep the material at dry place in Air-tight condition to avoid moisture pick-up
NOTE  :
The above given application rates and datas are approximate values only. Actual values to be arrived at shop floor depends upon the charge mix, composition of the alloy, type of the furnace and metal temperature etc.